It is recommended that lubricating oil be used inside the gearbox, recommended Mobilube 1 SHC 75W-90
Grease is recommended for the motor-gearbox coupling, and in the mechanical brake pivot, recommended Mobilgear OGL 007
| ACTION | FIRST CONTROLS | MAINTENANCE ROUTINE |
|---|---|---|
| Checking and topping up oil | 500 h | 6 months / 1000h* |
| Changing oil | Lubricated for life | Lubricated for life |
| Oil seal checking | 500 h | 6 months / 1000h* |
*The first condition that occurs
The values given are approximate and refer to normal use. In the case of intensive use, the values for routine maintenance should be halved; in the case of use in extreme temperature environments and in the presence of dust, the values should be reduced to one-third. It is the manufacturer's responsibility to adjust the values based on the specific application and available data.
Place the vehicle on a level floor and unscrew the upper oil plug (1) and the oil level plug (2).
Check the oil level. If necessary, insert oil from the plug (1) until it comes out of the oil plug (2).
Put in a maximum of 0.18 l of Mobilube 1 SHC 75W-90 oil.
Tighten all oil plugs after maintenance work (tightening torque 14 Nm).
Consult the attached documentation for information on tightening torques: